Pre-punching Outlet Hole Flexible Hose Making Machine-manufacture,factory,supplier from China

Convenient and fastThe prepunching outlet water belt adopts a modular design, which is simple and convenient to install.

Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.

Drip irrigation system consists of hose fitted with plastic emitters, that permit water to trickle out at a controlled movement without stopping up. The tubing is laid around the plants and trees to get water into their roots. You can go for pre-punched tubing with emitters already installed, or unperforated tubing, which you have to punch holes in and fix emitters in it.

Short descriptionThe agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.

Uhmwpe pipe making machine features1. According to our years of experiment and practice, the small screw pitch and big screw diameter are adopted for our UHMWPE pipe extrusion line. The production line can melt the UHMWPE, whose melt index is near 0, and slowly extrude it continuously.2. Our UHMWPE pipe extruder, comparing with normal plastic pipe extrusion machine, doesn’t need the cooling fan for the spiral barrel. Each section of the UHMWPE pipe extrusion machine comes with an independent control system, so the temperature precision and energy efficiency are both great.

Plastic pipe making machine: It is mainly composed of electrical control production-cabinet-rolling machine-pump-cooling water tank-collection and other parts, which can produce various styles and models of plastic pipes.It is equipped with a special single-screw extruder for polyolefin, which has the characteristics of high-speed foundation and high-speed speed.Professional separate mixing screw for polyolefin.SpecificationPipe diameter12mm16mm20mmWall thickness0.15-0.5mm0.15-0.5mm0.15-0.5mmTolerance±0.05mm±0.05mm±0.05mmApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-scre

The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.

Hight-efficiency single screw extruder has 8 strandard sizes:Φ30, Φ45, Φ65, Φ75, Φ90, Φ105, Φ120, Φ150mm, and the L/D ratio is 30:1D-37:1D Effective length. All the equipments are controlled by the PLC/PCC smart modular, further more the automatic control, real-time data record and closed-loop control are realizd. The advantage are high output, high adaptability for differnt raw material, highly stable good-quality extrusion and soon.HDPE pipe features:1.

1. The goods are packed in accordance with requirements of the manufacturing plant and standards of the Chinese People's Republic.2. Each place be fixed in accordance to the particularities of the goods.

Three layers co-extrusion film blowing machine is composed of three single screw extruders, three layer composite co-extrusion die , cooling system, tractor, film coiling device, temperature and electric control system.

According to many years of plastic machinery development and design experience, in the introduction of foreign advancedtechnology and digestion and absorption, on the basis of self-developed HDPE pipe production line.

Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.

Short description1.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.2. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.3.Our plastic making machine can make many kinds of plastic productions l

PRODUCTION LINE DESCRIPTIONSThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws. This production line is equipped with cutter (saw web or planetary).

As the viscosity of UHMW-PE molten state reaches up to 108Pa*s, liquidity is poor, and melt index is almost zero, so UHMW-PE is hard to be processed by general mechanical processing method.

main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements.main production parametersextruder typeSJ-55/28pipe diameter10mmscrew typesingle screwwall thickness0.6mmproduction speed80-200m/minemitter maximum screening speed800pcsemitter inlaid

1.    Product introductionThe PE Fusion-bonded Woven Tape Manufacturing Machine is a specialized device used for producing PE (Polyethylene) fusion-bonded woven tape. It utilizes the processes of melting, bonding, and weaving to transform the PE material into woven tape. This type of tape is widely used in fields such as agricultural irrigation, construction projectsWe are committed to providing high-quality woven belt product line that are widely used in various fields such as industrial manufacturing, construction, agriculture, and transportation.

Short description1. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.2.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.3.Our plastic making machine can make many kinds of plastic productions l

inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.

product performance and advantagesEasy operationLow maintenanceTake up small areaHigh output capacityLonger life of screw &barrelPP&LD can be processed due to its special screw designAC Invertor & Motor which synchronizes the entire ExtruderLatest technology used to force the melt into the die very effectivelymain technical parametersmodelsj-45/30diameter45mml/d95speed100rpmoutput50kg/hdrive power15heatingdistrict:4power:4central height500/1000emitter max.

Main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements. Main production specificationEXTRUDERSJ-30/25SJ-45/30SJ-50/28SJ-55/28SJ-65/25SCREW DIAMETER30MM45MM50MM55MM65MMOUTPUT(KG/H)850609555PRODUCTMICRO-SPRAY BELTMOLDING WAYDOWN-BLOWING

Three-layer co-extrusion blown film line by three single screw extruder, three layer composite co-extrusion blown film die head, cooling system, tractor, film reel and temperature and electric control system, mainly used in open width 1350-2000mm three-layer co-extrusion film.  Specification of Packaging Film Blowing Machine CHARACTERISTIC1. Frequency inverters control main motor and traction motor.2. Material of screw and barrel: 38CrMoAl-A after nitrogen treatment.3. Gear box: HARD teeth gear surface, casting alloy piston, high precise grinding, long life.4.

inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.

1.    Product introductionThrough a meticulous production process, we unfold and fold the raw material of the woven tape or belt, and after undergoing the heat sealing treatment, it transforms into a sturdy strip-like structure. Subsequently, we utilize laser technology to perforate the tape or belt, ensuring that the micro-jet holes are evenly distributed across the entire strip.Upon completion of the perforation process, we rinse and cool the tape or belt to stabilize its structure and dimensions.