Drip Irrigation Tape Vacuum Box Single Screw Extruder-manufacture,factory,supplier from China

(Total 24 Products for Drip Irrigation Tape Vacuum Box Single Screw Extruder)
Short description1. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.2.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.3.Our plastic making machine can make many kinds of plastic productions l
  Contacter maintenant
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contacter maintenant
The inlaid flat emitter drip irrigation tape production line is developde by the combination of our own techniques and advanced technologies introduced from foreign countries.The quality of the tape is quite satisfactory.
  Contacter maintenant
Three layers co-extrusion film blowing machine is composed of three single screw extruders, three layer composite co-extrusion die , cooling system, tractor, film coiling device, temperature and electric control system.
  Contacter maintenant
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contacter maintenant
PVC Pipe Extrusion Line                          ItemNameSpecificationQuantity 1Conical double screw extruderSJSZ65/1321set2Die head & mould1 set3Stainless steel vacuum calibrating tank160x 6m1 set4Caterpillar haul-off machine3kw1 set5Planetary cutter2.2kw1 set6Stacker 6m1 set8Belling machine1 set9MixerSRL-Z200/5001 set10Loader for mixerZD-11 set11CrusherSWP4001 set12Laser printer1 set  PVC pipe production line introduction1.
  Contacter maintenant
Short descriptionThe agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contacter maintenant
1. The goods are packed in accordance with requirements of the manufacturing plant and standards of the Chinese People's Republic.2. Each place be fixed in accordance to the particularities of the goods.
  Contacter maintenant
Short descriptionLabyrinth type drip irrigation equipment is our company draws on the technical advantages of domestic and foreign equipment combined with my unit technology and the development of a new generation of high-speed thin-walled cylinder-type drip irrigation pipe equipment.
  Contacter maintenant
The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contacter maintenant
Short description1.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.2. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.3.Our plastic making machine can make many kinds of plastic productions l
  Contacter maintenant
Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.
  Contacter maintenant
Pipe AdvantagesHigh wear resistance:It's 4-7 times of steel pipes, 3times of HDPE pipes, 4 times of nylon pipes.
  Contacter maintenant
Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.
  Contacter maintenant
Drip irrigation tape production line This equipment is mainly composed of a high-speed nozzle machine, a diameter measuring control tube system, a hot press forming machine, a cutter dividing machine, an air intake machine, and a coiling machine. It has the characteristics of simple operation, winding control, high production efficiency and energy saving.
  Contacter maintenant
The inlaid flat drip irrigation pipe machine more effectively manages water demand and maintains the irrigation system.This includes precise water application using wetness frontier detectors; smart irrigation technology to improve irrigation efficiency; technology that uses ultrasonic to clean drip pipes to improve efficiency; and improved irrigation system operation and maintenance through farmland geographic information systems.Application:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Speed (rpm):120 rpmShowroom Location:NonePlace of Origin:Shandong, ChinaBrand Name:Hu
  Contacter maintenant
HDPE pipe features1. HDPE Pipe Extruding Line adopts DC motor, and Eurotherm DC digital converter and high efficiency screw to ensure high efficiency extrusion.2. HDPE Pipe Extruding Line adapts basket type composite die head, which ensures not only the uniformity of high speed extrusion but also the stable performance of tubular goods3. HDPE Pipe Extruding Line adopts high efficiency double chamber vacuum calibrating technology and spray cooling bath to improve the rate of finished products of tubular goods and meet the demand of high-speed production.
  Contacter maintenant
To shaping the pipe with cooled mold, we add to the nozzle and core rod. Low temperature heat conduction oil will be injected into the pipe through the mold temperature control mechanism to cool the mold and shape the pipe material. In comparison to regular PE pipe extrusion machinery, our UHMWPE pipe extrusion machine is much cheaper due to the absence of vacuum shaping sleeve, vacuum box, and traction machine.
  Contacter maintenant
Plastic pipe making machine: It is mainly composed of electrical control production-cabinet-rolling machine-pump-cooling water tank-collection and other parts, which can produce various styles and models of plastic pipes.It is equipped with a special single-screw extruder for polyolefin, which has the characteristics of high-speed foundation and high-speed speed.Professional separate mixing screw for polyolefin.SpecificationPipe diameter12mm16mm20mmWall thickness0.15-0.5mm0.15-0.5mm0.15-0.5mmTolerance±0.05mm±0.05mm±0.05mmApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-scre
  Contacter maintenant
Three-layer co-extrusion blown film line by three single screw extruder, three layer composite co-extrusion blown film die head, cooling system, tractor, film reel and temperature and electric control system, mainly used in open width 1350-2000mm three-layer co-extrusion film.  Specification of Packaging Film Blowing Machine CHARACTERISTIC1. Frequency inverters control main motor and traction motor.2. Material of screw and barrel: 38CrMoAl-A after nitrogen treatment.3. Gear box: HARD teeth gear surface, casting alloy piston, high precise grinding, long life.4.
  Contacter maintenant
production line advantages1. It is non-toxic,odorless,anti-aging,lightweight and long serivce life;2.Using high-quality,high tensile-strength PE raw material;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.
  Contacter maintenant
product performance and advantagesEasy operationLow maintenanceTake up small areaHigh output capacityLonger life of screw &barrelPP&LD can be processed due to its special screw designAC Invertor & Motor which synchronizes the entire ExtruderLatest technology used to force the melt into the die very effectivelymain technical parametersmodelsj-45/30diameter45mml/d95speed100rpmoutput50kg/hdrive power15heatingdistrict:4power:4central height500/1000emitter max.
  Contacter maintenant
1.    Product introductionThe PE Fusion-bonded Woven Tape Manufacturing Machine is a specialized device used for producing PE (Polyethylene) fusion-bonded woven tape. It utilizes the processes of melting, bonding, and weaving to transform the PE material into woven tape. This type of tape is widely used in fields such as agricultural irrigation, construction projectsWe are committed to providing high-quality woven belt product line that are widely used in various fields such as industrial manufacturing, construction, agriculture, and transportation.
  Contacter maintenant
PRODUCTION LINE DESCRIPTIONSThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws. This production line is equipped with cutter (saw web or planetary).
  Contacter maintenant
Relate News
ExtruderThe extruder is one of the important core equipment of the polyethylene pipe production line. In the processing of polyethylene pipes, the most widely used host is a single-screw extruder.Single screw extruder is a kind of machine developed in recent decades. For many domestic enterprises, the design of single screw extruder is still based on traditional design theory.
The cooling method of the extruder. Extruders with a screw diameter greater than 45mm are equipped with a barrel cooling device. The diameter of the small extruder is less than 45 mm, because the barrel contains less plastic. The remaining heat can be diffused by convection between the barrel and the surrounding medium air. Therefore, the outside of the high-speed extruder usually does not have a barrel with a cooling device.Cylinder cooling methods are generally divided into air cooling and water cooling.1. Wind cooling.The air cooler mainly adopts air cooling.
The  diameter of the strip is controlled by the diameter management tool to make the measurement and manipulation of the strip diameter accurate and stable, and the main machine motor, the workpiece and the tractor  adopt a reliable frequency.2. Conversion control system and features of easy adjustment, reliable performance, stable working conditions and low wear 3. The extruder body and screw use nitriding alloy materials, which feature high hardness, high water resistance and long service life. 4.
On August 20, 2024, Jordanian customers came to Huaya factory to visit the strip drip irrigation tape production line. During the visit, the customers paid special attention to and showed great interest in our strip punching detection link.The strip punching detection of the strip drip irrigation tape production line is a key step to ensure product quality.
Do you know how to install drip tape correctly? Let’s take a look with the editor today!1. The plot where drip irrigation equipment is installed must be well cultivated and the stubble must be removed. Stubble, rocks, weeds, etc. are easy to break the drip irrigation belt to support the mulch. Water vapor is generated in the mulch to form a lens effect.2. When installing, the staff should carefully read the installation instructions of each component, and connect each component according to the correct installation method.3.
The extrusion system includes screw, cylinder, hopper, head and die. The plastic of the plastic extruder is plasticized into a uniform melt through the extrusion system, and under the pressure established in this process, the screw is continuously extruded out of the head.Screw: It is the main component of the extruder, which is directly related to the application range and productivity of the extruder.
I believe that many of my friends have heard of drip irrigation tapes and water-saving irrigation equipment, and want to try whether they are good or not, but if you want to play an ideal use effect, you must first learn the correct installation method, so today I will follow Let's learn about the correct installation method of drip tape.1. The plot where drip irrigation equipment is installed must be well cultivated and the stubble must be removed. Stubble, rocks, weeds, etc. are easy to break the drip irrigation belt to support the mulch.
On August 9, 2024, our factory welcomed distinguished customers from Algeria who came specially to visit our factory's strip drip irrigation tape production line.The strip drip irrigation tape production line is one of the core production facilities of our factory, which has attracted much attention for its efficient, precise and high-quality production capacity.During the visit, our professional staff introduced the production process, technical characteristics and strict quality control system of the production line to the customers in detail.
Application  of drip irrigation tape extrusion machineThe drip irrigation tape can be widely used in water saving and irrigation of agricultural field (cotton, grapery, peanut and wheat etc. ), greenhouse, gardens etc. And mountain and hill region.1.The diameter of tape is controlled by means of diameter- manage tool in order that the measurement and manipulate of diameter of tape is accurate, steady and the primary device motor, shaping element and tractor all adopt frequency dependable.2.
On October 20, we received two groups of customers. One group was from Turkey who came to view our new technology production line of prefabricated hole flat-laid water hoses. The other group was from Algeria who came to see our strip drip irrigation tape production line. Recently, our one-step prefabricated hole water hose has received extensive attention from domestic and foreign customers. At present, our company's technology is leading in China, and the entire production line is independently developed and produced, ensuring the compatibility and smoothness of the equipment.
How to reduce the energy consumption of the extruder? PVC pipe production equipment manufacturers believe that it is necessary to carefully analyze the energy consumption of the extruder: the energy consumption of the extruder refers to the electric energy consumed by a unit mass of plastic product below kwh/kg. According to the input and output, the energy consumption of the extruder can be divided into two types: 1. 77% of the energy input is driven by energy motors and related components, 22.8% of the barrel, head and cooling input are driven by external equipment, and 0.2% about.
The grand event of the plastics and rubber industry - PLASTICS & RUBBER INDONESIA 2024 is about to kick off.Exhibition Venue: Jakarta International Expo (located in Kemayoran).Exhibition Time: From November 20th to 22nd, 2024 (10:00 - 18:00 Western Indonesia Time); November 23rd, 2024 (10:00 - 17:00 Western Indonesia Time).Booth Number: A - 3328.At this exhibition, we will display our new products - the inlaid strip dripper drip irrigation tape (T-tape) production line and the prefabricated hole irrigation main belt equipment production line.