Drip Irrigation Pipe Micro-spray Belt Making Machine-manufacture,factory,supplier from China

Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.

inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.

Production line advantages1.Using high-quality,high tensile-strength PE raw material;2.It is non-toxic,odorless,anti-aging,lightweight and long serivce life;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.

Main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements. Main production specificationEXTRUDERSJ-30/25SJ-45/30SJ-50/28SJ-55/28SJ-65/25SCREW DIAMETER30MM45MM50MM55MM65MMOUTPUT(KG/H)850609555PRODUCTMICRO-SPRAY BELTMOLDING WAYDOWN-BLOWING

The inlaid flat drip irrigation pipe machine more effectively manages water demand and maintains the irrigation system.This includes precise water application using wetness frontier detectors; smart irrigation technology to improve irrigation efficiency; technology that uses ultrasonic to clean drip pipes to improve efficiency; and improved irrigation system operation and maintenance through farmland geographic information systems.Application:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Speed (rpm):120 rpmShowroom Location:NonePlace of Origin:Shandong, ChinaBrand Name:Hu

PVC Pipe Extrusion Line                          ItemNameSpecificationQuantity 1Conical double screw extruderSJSZ65/1321set2Die head & mould1 set3Stainless steel vacuum calibrating tank160x 6m1 set4Caterpillar haul-off machine3kw1 set5Planetary cutter2.2kw1 set6Stacker 6m1 set8Belling machine1 set9MixerSRL-Z200/5001 set10Loader for mixerZD-11 set11CrusherSWP4001 set12Laser printer1 set  PVC pipe production line introduction1.

HDPE pipe features1. HDPE Pipe Extruding Line adopts DC motor, and Eurotherm DC digital converter and high efficiency screw to ensure high efficiency extrusion.2. HDPE Pipe Extruding Line adapts basket type composite die head, which ensures not only the uniformity of high speed extrusion but also the stable performance of tubular goods3. HDPE Pipe Extruding Line adopts high efficiency double chamber vacuum calibrating technology and spray cooling bath to improve the rate of finished products of tubular goods and meet the demand of high-speed production.

Convenient and fastThe prepunching outlet water belt adopts a modular design, which is simple and convenient to install.

The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.

Uhmwpe pipe making machine features1. According to our years of experiment and practice, the small screw pitch and big screw diameter are adopted for our UHMWPE pipe extrusion line. The production line can melt the UHMWPE, whose melt index is near 0, and slowly extrude it continuously.2. Our UHMWPE pipe extruder, comparing with normal plastic pipe extrusion machine, doesn’t need the cooling fan for the spiral barrel. Each section of the UHMWPE pipe extrusion machine comes with an independent control system, so the temperature precision and energy efficiency are both great.

Plastic pipe making machine: It is mainly composed of electrical control production-cabinet-rolling machine-pump-cooling water tank-collection and other parts, which can produce various styles and models of plastic pipes.It is equipped with a special single-screw extruder for polyolefin, which has the characteristics of high-speed foundation and high-speed speed.Professional separate mixing screw for polyolefin.SpecificationPipe diameter12mm16mm20mmWall thickness0.15-0.5mm0.15-0.5mm0.15-0.5mmTolerance±0.05mm±0.05mm±0.05mmApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-scre

The inlaid flat emitter drip irrigation tape production line is developde by the combination of our own techniques and advanced technologies introduced from foreign countries.The quality of the tape is quite satisfactory.

Short descriptionThe agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.

Hight-efficiency single screw extruder has 8 strandard sizes:Φ30, Φ45, Φ65, Φ75, Φ90, Φ105, Φ120, Φ150mm, and the L/D ratio is 30:1D-37:1D Effective length. All the equipments are controlled by the PLC/PCC smart modular, further more the automatic control, real-time data record and closed-loop control are realizd. The advantage are high output, high adaptability for differnt raw material, highly stable good-quality extrusion and soon.HDPE pipe features:1.

Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.

Short descriptionLabyrinth type drip irrigation equipment is our company draws on the technical advantages of domestic and foreign equipment combined with my unit technology and the development of a new generation of high-speed thin-walled cylinder-type drip irrigation pipe equipment.

According to many years of plastic machinery development and design experience, in the introduction of foreign advancedtechnology and digestion and absorption, on the basis of self-developed HDPE pipe production line.

Pipe ApplicationsMine industry.Tailings and mud transport, underground filling pipeline.Coal industry.Coal mine  gas pipe, water supply and drain pipe, ventilation pipes, grouting pipe, slime water in coal washer plant, coal slurry pipelines.Sea or lake salt chemical industry.Sea salt, brine transport pipeline.Thermal power.Fly coal ash, chemical water, recycled water transport pipeline.Petrochemical.Corrosive medium or crude oil pipeline.Food processing.Water and material delivery pipeline.River dredging.Dredging, pumping sands conveying pipe.Public utilities.Sewage discharge, water supp

main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements.main production parametersextruder typeSJ-55/28pipe diameter10mmscrew typesingle screwwall thickness0.6mmproduction speed80-200m/minemitter maximum screening speed800pcsemitter inlaid

product performance and advantagesEasy operationLow maintenanceTake up small areaHigh output capacityLonger life of screw &barrelPP&LD can be processed due to its special screw designAC Invertor & Motor which synchronizes the entire ExtruderLatest technology used to force the melt into the die very effectivelymain technical parametersmodelsj-45/30diameter45mml/d95speed100rpmoutput50kg/hdrive power15heatingdistrict:4power:4central height500/1000emitter max.

Short description1.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.2. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.3.Our plastic making machine can make many kinds of plastic productions l

The inlaid cylindrical emitter drip irrigation pipe production line is developed by the combination of our own techniques andadvanced technologies introduced from foreign countries.Product DescriptionTape Diameter12/16/20mmTape Wall Thickness0.6-1.0mmExtruderSJ-75/33Production Speed50m/min(300mm space)PunchingServo motorExtruding Capacity120KgApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Material:38CrMoALAScrew diameter (mm):75 mmScrew L/D Ratio:33:01:00Screw Speed (rpm):90 rpmShowroom Location:India, Mexico, Russia, South Korea, South Africa, UkrainePlace of

1.    Product introductionThe PE Fusion-bonded Woven Tape Manufacturing Machine is a specialized device used for producing PE (Polyethylene) fusion-bonded woven tape. It utilizes the processes of melting, bonding, and weaving to transform the PE material into woven tape. This type of tape is widely used in fields such as agricultural irrigation, construction projectsWe are committed to providing high-quality woven belt product line that are widely used in various fields such as industrial manufacturing, construction, agriculture, and transportation.

Drip irrigation system consists of hose fitted with plastic emitters, that permit water to trickle out at a controlled movement without stopping up. The tubing is laid around the plants and trees to get water into their roots. You can go for pre-punched tubing with emitters already installed, or unperforated tubing, which you have to punch holes in and fix emitters in it.